Promotion Trimline Treadmill Gaggia Espresso Coffee Machine Grand Sale Discounted Omron Pedometers
Monday, November 28, 2011
Friday, November 25, 2011
How to put on a Screen protector on Apple iPhone or aloof any phone
Our geek will guide you through on how to put on a High Definition Mirror Effect Screen protector! You can get one today at www.accessorygeeks.com! www.accessorygeeks.com
Bodum Antigua Grinder Cheap Discount Kinky Straight Weave Hair
Monday, November 21, 2011
Polishing Your Car Or Truck Like the Pro's
We have all seen it before, wax build up trapped in and around door edges, emblems and moldings. That whitish chalky look that reveals a car or truck has been quickly and slop polished. If your ride is important to you and you really want to prep the finish like the pros then read on.
First off we determine how dirty the vehicle is. If it is simply dust from driving then air blowing it down will work to remove 80% of the dust on the surface. A small pancake compressor that plugs in to a 110 volt outlet will do the job just fine. As a safety measure purchase an air blower with a rubber tip so you will not scratch the surface if you accidentally bump it.
If at all possible detail your vehicle in a garage or under a carport and never in the direct sun. The outside wind will tend to blow dust back on to the surface as you are trying to detail, so it makes sense to do it indoors if possible. The next step is to purchase tack cloths. The Surgical Blue brand of cloth is very tacky yet it does not leave a sticky residue when used properly like some brands do.
It is best to unfold the tack cloth so it is puffy, about a 1/2 thick covering just out side your hands surface. While lightly wiping the cars finish this will pick up 100 percent of the dust. These cloths are designed for Pre-paint cleaning so you know they are the best. Be sure and let the cloth do the work. No pressure just let it glide. 2- 4 strokes as long and straight as you can then folding the tack cloth to a new clean side. Repeat until the whole vehicle is wiped. Dupont has E-4144 Sontera polishing cloths that are disposable. These will not scratch any surface but allow water wiping, polish application and removal just right.
If the air blow method and tack cloth will not do the job because there is too much dirt on the surface then the next method is to wet down some Sontera towels and wipe the surface clean. Without tearing them in to individual pieces fold 3-4 cloths together the same as we discussed with the tack rag and dampen them well.
Be sure and squeeze excess water from the towels so it is as wet as can be without dripping. It should not drip once you squeeze it out, other wise you will be leaving water streaks and spots on the finish. The same method is used as the tack rag, long strokes but turn the rag more often to a clean side.
Remember that taking your car to a car wash and or using a wash bucket like an every day driver will scratch the finish. This will be undetectable outside and in high light but in low light you will see the hair line scratches that the soap and water bucket method offers. The dampened Sontera cloths will pick up the dirt easily because of the amount of moisture on the towel.
You have to turn the cloths to a clean area on a regular basis until your project is completely done. This could mean 3-6 sets of cloths if need be. Folding them to a 1/2 thick like the tack rag is perfect and continue to wipe and turn to a clean side until the rag is not picking up any more dirt. Never rinse out in water and use the same cloths as this will scratch the surface. Once the car is completely cleaned the next step is to mask off all the emblems, moldings and body gaps to keep wax and or polish from entering in and being stuck down in to the crevices making it hard to remove. Simply lay it on with your left hand/fingers pushing in to place while the right hand is guiding it. Reverse that if you are left handed.
3M 05990 hand Glaze is not a wax and it will only last 1-2 days. The finish it leaves is superior to that of a wax job but it is used for show work only. The following application methods will be the same for the wax of your choice. In the refinishing business we use this product because it has no silicone like wax which can contaminate a paint shop with fish eye problems.
Keep in mind that although it does not last as long as wax does the excess of this product is wiped off much easier then excess wax is. Small amounts are squeezed on to the Sontera cloths the size of a 50 cent piece is fine. In a circular motion apply the glaze with minimal pressure, when you witness this you can see how easily a molding or emblem will get buildup in the cracks compared to the taped areas.
You simply take another set of folded dry cloths and wipe until the residue is gone. You will see a beautiful reflection in the paint. If you have stubborn scratches or any stains 3M Finesse It part #5929 will remove them. It takes longer by hand using this material but if you are not use to power buffing then only use it by hand. It is the same application rate as all the other methods. It will also buff out the finish nice but will still need to be glazed to finish it off.
On to the tires we use a product called Forever Black available at most auto parts stores. This product blackens the tires so they look brand new but it does not leave them shiny or fake looking like some products do. Tires need cleaning before hand just like paint does. Using some of cloths previously used on the painted surface water wipe them down just past the treads.
For an all out show car remove the tires and clean in and out of the treads first. We actually rap the tires with plastic after highly detailing them and once we have the vehicle in place at a show we cut the plastic away so even the tread grooves are perfect. Apply tire gel evenly and liberally as the foam block applicator works and the tires are very porous. Wipe with a dry rag to remove the residue. Touch up if needed.
Following these methods will give you the ultimate results. The typical vehicle will take about 2 hours to achieve this if you are working steadily. This is worth it if you have to have the best.
Article provided by the Hot Rods team of Jeff Lilly Restorations!
Good 12v To 24v Dc Dc Converter Medela Pump In Style Breast Pump Save You Money!
Saturday, November 19, 2011
Respirator Use for Farm Dust
Protective equipment is important for farmers working in dusty conditions. Grain dust, molds, pollen, animal dander, soil dust, welding fumes, and smoky diesel exhaust can cause serious respiratory problems. Although they are less toxic than some chemicals, dusts are suspended in the air, so they can easily enter the lungs and cause damage.
Dust in the lungs short-term can cause physical stress, fatigue, and shortness of breath. Long-term it can cause congestion, coughing or wheezing, dust sensitivity, and infections such as colds, bronchitis, and pneumonia. Over time, dust exposure can result in such illnesses as farmer's lung, asthma, emphysema, chronic bronchitis, and other irreversible, incurable ailments.
To avoid respiratory problems, farmers should wear a respirator whenever they work in dusty conditions. Respirators may especially be a good choice for those already congested or with breathing problems, those generally bothered by dust, or those concerned about the amount of foreign particles getting into their body.
Air-supplied respirators rarely are used in farming activities. They are relatively expensive and wearers must be trained. But many dusty farm conditions can be improved with an air-purifying respirator that fits over the nose and mouth and uses a filter or cartridge to mechanically remove dust particles from the air.
When selecting a new respirator or evaluating an existing respirator, consider several factors.
(1) All respirators used in farming activities should be approved by the National Institute of Occupational Safety and Health (NIOSH).
(2) Always use a respirator appropriate for the task. Many problems result from using an inappropriate respirator. For example, dust masks will not reduce chemical vapors. A respirator approved for use with chemicals may not filter dust. The specific contaminant for which the respirator is approved is written on the cartridge filter or in the respirator instructions.
(3) Select a properly rated respirator. As part of testing, a respirator is assigned a "protection factor" or PF rating indicating how well it can perform its job. For farming activities always use a respirator with a PF rating of 10 or above.
(4) Make sure the respirator is the proper size and fits well. To function properly, a respirator must form a good seal with the face. Dust slipping through a poor seal goes directly to the lungs. Respirators are available in sizes and designs to fit most faces, but eyeglasses, clothing, and facial hair such as beards or sideburns, can interfere with the seal. All respirators must be fit tested by safety professionals while being worn.
(5) Respirators can be either disposable or non-disposable. Disposable respirators are inexpensive and can be discarded when dirty or when the job is finished; but they can be relatively expensive if protection is required on a regular basis. A better choice for continual needs is a durable model that can be washed and stored after each use.
(6) The wearer of an air-purifying respirator must be in good physical condition. Since wearers breath through a filter, breathing is more difficult and can stress people with heart conditions or respiratory ailments. Always get a physician's approval to wear a respirator.
No respirator can solve all air quality problems. One worn incorrectly is as dangerous as wearing none at all. Wearing a faulty or task-inappropriate respirator may give a false sense of security. Also respirators should not be worn with dust concentrations in the explosive range. If it's too dusty to see your hand at arm's length, it's dusty enough to be explosive. Another danger occurs in toxic environments. Air-purifying respirators do not provide oxygen; air in the working environment must have at least 19.5 percent oxygen. Death can occur in a limited-oxygen environment. And dust-filtering respirators cannot protect wearers in toxic chemical environments such as manure pits, silos, or sludge tanks. Wearing a respirator equipped with a dust filter in these conditions can be fatal.
The use of respirators in day-to-day farm operations may be a new practice for many operators. However, respirators can reduce exposure to farm dust and may prevent serious respiratory problems.
Promotional 4 Poster Canopy Bed Philips Ambilight Television Fast
Monday, November 14, 2011
Use of Ponds Daily Face Wash
It is always required of one to take care of skin. There are many things that can hamper the skin texture making it look lifeless and damaged.
Women from all over the world have put their trust in the cosmetics churned out by Ponds brand. Ponds have won the hearts of almost every section of women by offering a mild and effective skin care. Be it a moisturizing cream, glycerin soap or a simple face cream everything needs available with this brand has made it stand above all the other cosmetic brands.
Where, today when one moves out in highly polluted environment, the skin comes in direct contact with pollution and dust. It becomes important to buy an effective and skin-friendly face wash like Ponds face pack. This facial wash has to be applied at least twice a day, to see the skin improvement results. This face cream make the skin get rid of grime and dirt that often settles on it. To have proper skin care, one need not require relying on a medicated soap or a chemical face wash that can snatch out the skin and its essential oils and nutrients. So, it is unwise to stick to a skin product which is both had that leaves skin scratchy and dry.
Ponds face cream a mild daily face wash that is recommended for use. it by Ponds is made available in supermarkets. Ponds Daily Face cream is soap free and is free from harsh chemicals that are prone to harm your skin. This face cream contains an organic surface active agent that benefits all types of skin. It produces creamy lather and is very effective to remove all kind of makeup. Application of this soap leaves behind clean, smooth and revitalized skin.
This helps to remove tired surface cells and leaves a refreshed feeling and along with healthy glow on the face. With the application of Ponds daily face wash the skin feel refreshed and cared for, all through the day. The glowing skin is sure to impart an appealing and impressive glow which is sure to attract glances having appreciation in them.
The daily face wash is best for your skin. Ponds will give you a lot to offer benefits to every type of skin! Just go ahead buying this amazing face wash, cosmetic products and wear a remarkable difference in your skin.
Tuesday, November 8, 2011
3M Paintshop Safety Box
3M's Paintshop Safety Box - a handy starter kit for the possible PPE requirements within the car paintshop
Subscribe to:
Posts (Atom)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |